Looking for Pneumatic Linear Sorter Sorting Conveyor Equipment Machinery

Buy offer Details

I'm looking for a mobile pneumatic conveying equipment capable to unload bulk cargo sediments : barite powder and cement. The materials are dry, and the temperature is ambient, which is around 110 F in the hot season. The suction maximum depth is around 12 meters (depth), plus horizontal distances around 50 meters. The volume is not the issue, due that these are leftovers that needs to be removed as fast as we can, the vessels needs to be cleaned in the least time possible. The leftover volume in the tanks bottoms varys from tank to tank, making a total from 1 ton to 5 tons (total volume contained in all 5 silos), so volume is not the challenge.The project is located in southern México, and the scope of work is to empty the cement / barite powder leftovers from the silos that are under the vessel's deck, the maximum suction depth is 12 meters, and the horizontal conveying distance is around 50 meters, which will be shorter once we finish conveying the material from the last silo, to the next, until we reach the first silo that is located underneath the conveying unit; Discharge distance from the unit is just 5 meters long to the cutting box. The maximum equivalent length of the system is 80 meters (240 ft). Which by the way could be hose or needs to be pipe?If you can advise on which will be the proper equipment for this application, just please keep in mind that space under the deck is tight, so not sure what can of blower is required, and if the blower can fit thru the limited spaces, or these could be set up on the vessels cargo deck, and run the air line (80 meters equivalent length), to supply the needed flow/pressure. Due to the restrictions, I think a negative pressure system / pull / vacuum is more adequate for my problem, but you guys have the final call on this. Also, if you have any option for a dust control (discharge cyclone?), to reduce the cement dust generated during the discharge of the product on the cutting box, top mounted. The layout I'm attaching, was done for a push / negative / vacuum system, but I really want to use an eductor system (positive / push), it is a much leaner set up.