Horizontal machine for metal

Buy offer Details

Dear Sir/Madam,
This is AlexeyDyachkov from RU.
Im looking for products with the following specifications :
Horizontal broaching machine for stretching
The machine is designed for processing by stretching pre-processed or black holes of various geometric shapes and sizes. The machine must provide stretching (calibration) in the automatic mode of grooves in the anchors of electric motors in the range of the pulling force and the stroke length of the broaching tool.
Specifications :
1. The greatest tractive effort, not less than KN 100
2. The longest stroke of the working slide, no more than 1250 mm
3. The greatest length of the broach used, not more than mm 1365
4. The largest diameter of the workpiece, no more than mm. 600
5. Hydraulic machine drive
6. The speed of the working stroke, m / min 1.5 ... 12
7. Power of the main drive electric motor, not more than kW 11
8. The total power of the electric motor is not more than 11.38 kW
9. Sizes of the supporting surface of the plate, not more than, mm 450x450
10. Machine dimensions
Length, no more, mm
Width, not less, mm
Height, no more, mm
3800
1995
1715
11. Mass of the machine, not more than kg 4050
3. The composition of the machine.
 A semiautomatic machine designed to process (calibrate) grooves in the armature gland of a traction motor should consist of the following units :
- main bed;
- hydro;
- workers sled;
- tracking mechanism;
- mechanism for setting the stroke;
- a set of cartridges (workers and key);
- electrical equipment based on the controller
- basic fixture for tool cassette;
- tool cassettes;
- set of broaching tool (2 units);
- nodes automatic division of the workpiece;
- node moving the workpiece (for the possibility of reverse drawing);
- lubrication systems;
- cooling systems;
technical documentation.