Earthquake shake table

Buy offer Details

Dear Sir/Madam,
This is David from CL.
Im looking for products with the following specifications :
a stage mounted on the ground support plate. The stage is actuated by three linear motors and move in either the x or y directions. Two motors mounted on the ground support plate of the table operate in parallel and power the x-axis. A single motor mounted to the stage actuates the y-axis. Together the motors allow for XY planar motion in the Cartesian arrangement. The displacement and acceleration of the stage are measured by the on-board encoder and the accelerometer sensors. The encoder and accelerometer are connected to the DAQ and their signals can be displayed and processed further. The Shake Table can be programmed through a provided Shake Table software.
Details :
Dimensions (L x W x H) 106.7 cm x 106.4 cm x 20.3 cm
Total mass 550 kg
Payload area (L x W) 71.1 cm x 71.1 cm
Top axis mass 95.22 kg
Bottom axis mass 175.5 kg
Maximum payload at 1 g¹ 100 kg
Maximum travel ± 10.8 cm (x), ± 10.8 cm (y)
Operational bandwidth¹ 10 Hz (x), 10 Hz (y)
Maximum velocity with 100 kg payload¹ 1.55 m/s (x), 1.29 m/s (y)
Maximum force with 100 kg payload¹ 2626 N (x), 2189 N (y)
Maximum acceleration with 100 kg payload¹ 1.0 g (x), 1.0 g (y)
Linear motor maximum peak power 4554 W
Linear motor maximum current 36.0 A peak / 12.0 A continuous
Amplifier maximum peak current 40 A (x), 30 A (y)
Amplifier maximum continuous current 20 A (x), 15 A (y)
Maximum operating peak current limits 36 A (x), 30 A (y)
Encoder resolution (in quadrature) 1,000,000 counts/m
Effective stage position resolution 1 ?m
Accelerometer range ± 49 m/s²
Accelerometer sensitivity 1.0 g/V
please use this as a reference
/products/shake-table-iii-xy/#overview