As customres requirement Weight and No overseas service provided After-sales Service Provided storage tank

Buy offer Details

Hi ,
Skeleton Technologies is looking for potential Suppliers for a movable liquid storage tank. We have quite a detailed list of requirements and I hope you can support us in this matter.
Therefore, I would kindly ask you to send me your e-mail address to continue this discussion via e-mail. Then I would be able to include other interested people from Skeleton into talks.
Please find our detailed requirement list below :
Construction
Removable lid with fork/sling connections
o Lid to be secured with screw clamps, not bolts (see Lid Connections).
Movable/on wheels (160 mm)
o 2 steering wheels with brakes and 2 fixed wheels.
Internal diameter approx. 750 mm.
25 mm jacket (total diameter of 800 mm).
Jacket pressure up to 3 bar.
All wetted surfaces made with SS316/non-wetted surfaces with SS304.
Internals (inc. Agitator).
Working volume of 350 L
Ruvastar cyclo paddle agitator with VSD.
o Motor power 1.5 kW.
o Voltage 400 V.
o Frequency 50 Hz.
Agitator shaft 30 mm
Agitator shaft finish Ra 0.8 m.
Lid Connections
1 x 167 mm flange for filling.
1 x 2 (51 mm) sight glass port
1 x 2 breathing valve with 180 bend.
6 x star grip screws for connection to tank.
o 2 x centring bolts
Tank Connections
Jacket :
o inch inlet, 1 inch outlet.
Bottom drain valve :
o 1, completely emptying as per DIN 32676 series C.
Product Data
Density max. 1600 kg/m3
Viscosity max. 10 000 mPa-s
Finishing
Outside brushed Ra < 1.2 m.
Inside WIG-welded.
Inside Ra < 0.6 m.
Inside and outside electropolished
Best regards,
Siim-Erik Alamaa
Skeleton Technologies