24v 48mm diameter dc motor 15000 rpm

Buy offer Details

The motors that need replacing are 150 watt (powered by an 8 amp, 24 volt supply), 48mm diameter, 68mm body length, 5mm spindle. Similar to the Machifit 1433753 with approximately 15000 rpm.
The dimensions have to be as per the Machifit shape, as it fits in an enclosure Slight differences are : the ridge part at the drive end is closer to 6mm high as opposed to 8mm, diameter is closer to 22mm as opposed to 21mm. The drive spindle extends to 9mm (but can be cut shorter if new motor has a longer shaft). The screw holes are for M5 bolts.
The motors are to be fitted to cattle shearing clippers. Facing the spindle, it rotates CCW (CW when viewed from the contact/non-driving end). The machines can be worked for up to 5 hours in a day over five days per week and 4 months in a year.
Best wishes
John