HDPE has several properties that make it ideal as a
packaging and manufacturing product. It’s stronger
than standard polyethylene, acts as an effective
barrier against moisture and remains solid at room
temperature. It resists insects, rot and other
chemicals. It is easily recyclable and can be used
again and again. Recycled HDPE creates no harmful
emissions during its production or during its use
by the consumer. Also, HDPE leaks no toxic
chemicals into the soil or water.
HDPE is one of the most commonly used plastics in
the world. It is typically found in milk jugs,
plastic bags and refillable plastic bottles. In
addition to plastic lumber and recycled plastic
furniture, recycled HDPE is used to manufacture
lawn and garden products, buckets, crates, office
products and automobile parts.
2.Grade
HDPE pipe grade can be used in the production of
pressure pipes, such as pressurized water pipes,
fuel gas pipelines and other industrial
pipes.
HDPE Injection grade, red, blue, green,
HDPE Blow grade, white, grey, black
HDPE Pipe Grade black pellet
HDPE coating grade
And So On
3.Specification
HDPE cable material Property
Typical Value
Mass density g/cm 3
0.941-0.959
Melt flow Rate(190 centidegree
/2.16kg)g/10min
≤1.0
Tensile yield strength MPa
≥19.0
Flexural modulus Mpa
≥965
Elongation@ break %
≥400
Impact Embrittlement temperature
centidegree
MAX -118
Dielectric Constant
100KHZ
2.32
1MHZ
2.31
Loss Tangent
100KHZ
MAX 0.0001
1MHZ
MAX 0.0001
Volume resistivity OHM-CM
MIN 1x10 15