MOQ | 1 Unit |
Packaging | 480mm*245mm*490mm |
Lead Time | 7 |
Frequency | 20Hz-1MHz | Warranty | 12 Months |
OEM | available |
UC2878/UC2878A
High
Frequency
LCR meter
Performance Characteristics
■ Four-parameter display, arbitrary parameter combination, up to 12 kinds of measurement parameters.
■ 7 inch 16: 9 TFT LCD display, resolution: 800×480 RGB
■ Basic measurement accuracy is 0.05%, the maximum test speed can reach 50 times/Sec.
■ Test frequency range: 20Hz—1MHz, resolution is 10 mHz.
■ Automatic level control ALC function for testing voltage or current.
■ Four different signal sources output impedance such as 30 Ω, 100 Ω, 50Ω,10 /CC
■ Built-in comparator, 10 file sorting and file counting function
■ Graphical scanning analysis function supports frequency/ level/offset scan, which can help you dissect the device performance easily.
■ 10 points list scan function.
■ Internal 0V, 1.5V, 2V DC bias voltage source.
■ 2m/4m test cable expansion(optional accessories)
■ Optional ±10V(±100mA)及1A internal DC bias source.
■ Internal 100 setting files for storage or call, 500 groups of testing files of U disk are expanded to save or call.
■ Software version of the instrument can be upgraded and updated by USB HOST.
■ U disk can support file systems with FAT16, FAT32 format.
■ Standard RS232C, HANDLER, USB HOST, headphone interface, optional GPIB, LAN interface.
Measurement function |
|||
Test frequency |
UC2878 20 Hz-1MHz,10mHz resolution |
||
UC2878A 50Hz - 1MHz, 44 frequencies |
|||
Test parameters |
|Z|, |Y|, C, L, X, B, R, G, D, Q, θ, DCR |
||
Basic measurement accuracy |
0.05% |
||
Equivalent Circuit |
Series, parallel |
||
Math function |
absolute deviation, percentage deviation |
||
Range method |
automatic, hold, manual selection |
||
Trigger mode |
internal, manual, external, bus |
||
Measurement speed(≥1kHz) |
Fast speed: 50 times/sec, medium speed: 12 times/sec, slow speed: 3 times/sec |
||
Average time |
1—255 |
||
Delay time |
0—60s, 1ms as step |
||
Correction function |
Open circuit / short circuit / load |
||
Test end configuration |
Five ends |
||
List scan |
10 points list scan function |
||
Display mode |
Direct reading,Δ,Δ%,V/I(Measured voltage / current monitoring) |
||
Display |
800×480 RGB7 inch 16: 9 TFT LCD display |
||
Test signal |
|||
Output impedance |
30 Ω, 100 Ω, 50Ω, 10 /CC optional |
||
Test signal level |
Normal:5mV-2V, 1mV step constant level:10mV-1V, 1mV step |
||
Bias source |
internal |
0V, 1.5V, 2V |
|
optional |
UC6802A:±10V(±100mA)DC bias current |
||
UC6802B:0-1A DC bias current |
|||
Display range |
|||
|Z|, R, X |
0.01m Ω — 99.9999 MΩ |
||
DCR |
0.01 mΩ — 99.9999 MΩ |
||
|Y|, G, B |
0.00001µS — 99.9999 S |
||
C |
0.00001 pF — 9.9999 F |
||
L |
0.00001 µH — 9999.99 H |
||
D |
0.00001 — 9.9999 |
||
Q |
0.00001 — 9999.9 |
||
θ (DEG) |
-179.999º — 179.999 º |
||
θ (RAD) |
-3.14159 — 3.14159 |
||
Others |
|||
Comparator function |
Ten files: (nine files qualified, a file unqualified), and another subsidiary file AUX |
||
Memory |
10 groups of internal setting files for storage / recall |
||
Interface |
Standard RS232C, HANDLER, USB HOST, headphone interface, optional GPIB, LAN interface |
No.79 Lihua North Road, Tianning District, Changzhou, Jiangsu, China