Port | TIANJIN |
Lead Time | 40 DAYS |
Stile Spanish Tile offers the natural beauty of clay tile roofing in lightweight steel material.
Sapphire European Tile provides the elegant beauty of European tile roofing in a custom cut-to-length steel material. Sapphire is stamped in 3′ to 19′ 6″ sheets for ease of installation – a tough 26 gauge steel and baked on Hylar/Kynar paint finish ensure strength and longevity.
Product
description:
Sapphire European Glazed Tile Sheet Stile Spanish Roofing Tile
Roll Forming Machine technical parameters
Length of the main part | About10500*1650*1500mm |
Weight of main part | About 9.5 tons |
Voltage | 380V/50HZ/3Phase (as customer`s request) |
Roller fixer | Middle plate welded |
Frame | 350H steel welded |
Middle plate thickness | 20mm/18mm/16mm |
Drive mode | Chain Drice//Gear Drive |
Material of rollers | 45# steel, surface hard chromium plating. |
Material of shafts | 45# steel |
Diameter of shafts | Φ80mm(depend on different design) |
Number of rollers: | 13 rollers |
Main power | 5.5kw |
Cutting&Hydraulic | Double guide pillar |
Hydraulic motor power | 3kw, 4kw |
Hydraulic Pressure | 10-12MPa |
Cutting drive | Decelerating motor + Chain drive gear all by high-frequency |
Control System | PLC system: Mitsubishi, Panasonic,Dental,Siemens,Schneider |
Feeding Material width | Better as your drawing or from our designer |
Feeding Thickness | 0.8~1.5mm |
Effective width | Better as your drawing or from our designer |
Productivity | 8-12m/min |
Package of machine | Waterproofing membrane, standard export packing |
Sapphire European Glazed Tile Sheet Stile Spanish Roofing Tile
Roll Forming Machine introduction and
feature
1. The main parts: roll forming machine; molding press; cutting
machine; PLC computer control; hydraulic system.
2. The machine is stable, with no noise, no shake.
3. Controlling by computer, PLC display, the operation is easy,
running is steady and reliable, endurable.
4. Cutting machine is characterized by stable driving, easy
operation.
5. The hydraulic system uses the CDF-10 hydraulic pump, long
operating life, no noise.
6. Material: galvanized, colored steel or aluminum
coil.
7. We can make and design the kinds of roll forming machines
according to customer's requests.
Packaging
Details
1. Need one 40ft
container.
2. Fit for ocean
shipping.
3. The main body of the
roll forming machine will be naked packing into the container,
covered with plastic film.
4. Steel wire fixes the
machine into the container, in case of any damage when shaking on
the sea.
5. The spare parts will be
packed into the carton box.
6. The received goods table
put into a carton box.
7. Manual decoiler naked
package.