MOQ | 1000 kg |
Port | shanghai |
Packaging | 25kg/Drum |
Lead Time | 7 days |
Everflon™ PTFE (polytetrafluoroethylene) granular fluoroplastics are ideal for compression molding a wide variety of components and shapes; such as rods, tubes and sheets. Products fabricated from genuine Everflon™ PTFE are unaffected by most chemicals and feature superior electrical, low friction and mechanical properties.
Products manufactured with genuine Everflon™ PTFE are rated for continuous service at 260°C (500°F).
Everflon™ PTFE granular fluoroplastic resins are considered non-melts and are generally converted to finished articles in a three step process. 1) The resin is compression molded into a shape form (rod, tube, sheet). 2) The shape, once removed from the mold, is then sintered above its melting point to form a solid PTFE billet. 3) The solid PTFE billet is then machined into the finished article.
Everflon™ PTFE granular fluoroplastics are also available in chemically modified grades. The modified Everflon™ materials deliver valuable additional capabilities while retaining the exceptional chemical, thermal, and low-friction properties of conventional Everflon™ PTFE fluoroplastic resins.
Specifically, Everflon™
granular fluoroplastics exhibit enhanced permeation resistance, a
smoother less porous surface finish, improved bond strength and
weldability, and improved dielectric breakdown
strength.
Seals, valve seats, gaskets, tank lining, fluid handling components and other end use components requiring a high performance fluoroplastic material.