JJ Type Suspension Clamp

Product Details

Technical Specification:

Reference	Capacity	Material			Weight(kg)
		Body	insert	Screw
HC-5-8	5-8MM	Galvanized steel	UV protected neoprene	Galvanized steel	0.19
HC-8-12	8-12MM		UV protected neoprene	Galvanized steel	0.19
HC-10-15	10-15mm		UV protected neoprene	Galvanized steel	0.19
HC-15-20	15-20mm				0.19

Key Features:

Four sizes to cover the full range of ADSS cables from 5 to 20mm..

Easy install with stainless steel bands or pole bolts.

The shape of the J Hook allows a running out of the cable directly in the hook

The suspension clamps can be directly secured to the poles using bolts or bandings. -They can also be installed on hook bolts to provide some flexible suspension point and give extra protection to the cable against wind induced vibrations

Long service life and low prices.

Installation procedure

Installation of the J Hooks on the poles :In case the suspension clamps are directly secured t the pole, place them perpendicularly to the cable route and secure them to the pole using bolts or pole banding. Remove the neoprene inserts.In case of suspended J Hooks, install pole brackets or hook bolts at all intermediate poles with angle < 20°. The brackets and/or hook bolts should be positioned on the pole perpendicularly to the cable route.

Running out and tensioning of the cable :Dead-end the cable at the first end pole.The shape of the JHC enables to run out the cable directly in the J Hooks. Some telecom companies however may require the use of temporary running out rollers. Install them just above the J Hook Clamps. Different models of running our rollers are available from Telenco.Run the cable on the rollers or directly in the J Hooks to the last end pole and tension the cable to its full installation load using a cable grip, a winch and a dynamometer.