MOQ | 1000 Square meters |
Port | QINGDAO/SHENZHEN/SHANGHAI/NINGBO/GUANGZHOU |
Packaging | Roll Packing |
Lead Time | 7-20 |
TL-M01 | " Aging resistance, filter ,drainage,separation,filtration,reinforcement" |
Product introduction : The polymer self-adhesive film (HDPE) waterproof membrane is made of a special high-density polyethylene homogeneous sheet as the main material, and the surface is covered with self-adhesive adhesive. It is suitable for post-casting concrete or cement mortar mixture. Connected waterproof membrane. A self-adhesive lap edge with a width of 70 mm is reserved on the long side of the membrane.
Product Specifications:
Thickness (mm) |
|||
pre-laid |
1.2 |
1.7 |
2.0 |
Executive standard : GB/T23457-2011 pre-laid
serial number |
project |
index |
|
1 |
Tensile properties |
Maximum pulling force/(N/50mm)≥ |
500 |
2 |
Film elongation at break%≥ |
400 |
|
3 |
Tear strength of nail rod/N |
400 |
|
4 |
impact performance |
Diameter (10±0.1)mm, no leakage |
|
5 |
static load |
20KG, no leakage |
|
6 |
heat resistance |
70℃, 2h without displacement, flowing or dripping |
|
7 |
low temperature bendability |
-25℃, no cracks |
|
8 |
Water channeling resistance |
0.6MPa without water channeling |
Scope of use :
Applicable to various roofs, basements, tunnels, and other building waterproofing projects;
Waterproofing of roofing and underground works of civil and industrial buildings, water storage tanks, municipal works, bridges, subways, tunnels, dams and other projects, especially suitable for key projects with high requirements on durability, corrosion resistance and easy deformation.