geocell geoweb load support

FOB Price 0.69 - 8.58 USD / square meter

MOQ	1000 square meter
Port	shanghai
Packaging	Folden strips with film & label, outside with waterproof cloth on wooden pallet(optional)
Lead Time	7

Quick Details (View All)

GM330	0.69-7.89	GM356	0.69-6.89
GM432	0.69-5.89	GM445	0.69-4.89
GM711	0.99-4.89

Product Details

Introduction:

Cellular confinement systems (CCS)—also known as geocells—are widely used in construction for erosion control, soil stabilization on flat ground and steep slopes, channel protection, and structural reinforcement for load support and earth retention.

Material:

Typical cellular confinement systems are geosynthetics made with ultrasonically welded high-density polyethylene (HDPE) strips or novel polymeric alloy (NPA)—and expanded on-site to form a honeycomb-like structure—and filled with sand, soil, rock, gravel, or concrete.

TDS:

Anhui Hechuang New Synthetic Materials Co., Ltd.
Material Properties
Polymer Density (ASTM D 1505)		g/cm3		0.935-0.965
Environmental Stress Crack Resistance (ASTM D 1693)		hrs		>5000
Carbon Black Content (ASTM D 1603)		%		1.5％ --2%
Nominal Sheet Thickness before texturing (ASTM D 5199)		mm		min. 1.27-5%,+10%
Nominal Sheet Thickness after texturing(ASTM D 5199)		mm		min. 1.52-5%,+10%
Material		Compound of various Polyethylenes and additives
Texture		Polyethylene strip consists of a multiple rhomboidal indentations, over the entire strip on both sides of the strip.The indentations have a surface density of 22 to 32 per cm2
Perforations		Polyethylene strip is perforated with horizontal rows of maximum 10mm diameter holes. Cell perforations area is less than 12% of cell surface area.
Cell/ Section Properties
Property		Unit	GM330	GM356	GM445	GM660	GM712
Weld Spacing		mm	330	356	445	712	1000
Cell Depth		mm	75, 100, 125, 150, 200
Expanded(± 3%) Cell Dimensions	Width	mm	244	259	320	508	707
	Length	mm	210	224	287	475	707
Expanded(± 3%) Cell Area		cm2	250	289	460	1206	2500
Nominal(± 3%) Expanded Section	Width	mm	2.44	2.59	2.56	2.56	5.66
	Length	mm	6.1	6.5	8.35	13.72	11.31
Nominal(± 3%) Expanded Section Area		m2	14.9	16.8	21.4	35.1	64.0
Seam Properties		Cell Depth
		mm	75	100	125	150	200
Seam Peel Strength(EN ISO 13426-1,Method B: Peeling Test)		N	1065	1420	1775	2130	2840
(Other sizes are available to order)