Please wait while your account is being registered at Tradewheel.com 
Join World's Fastest Growing B2B Network
Please wait while your account is being registered at Tradewheel.com
Join World's Fastest Growing B2B Network
Bio
Excellence international Tech Co.,Ltd has been acting as sole
agent for the sale of flexcell products for more than ten
years,Bio Excellence can provide free technical guidance for
flexcell tension, compression, fluid shear products, user site
installation as well as training, until the user can use them
without limiting number of training times.If you have any
questions, please do not hesitate to contact us.If you have any
questions, please do not hesitate to contact us.
A computer-regulated bioreactor that uses vacuum pressure and positive air pressure to apply cyclic or static strain to cells cultured on flexible-bottomed culture plates.
Apply equibiaxial or uniaxial tension to cells in 2D and 3D culture.
Simulate in vivo tissue strains and frequencies in an in vitro setting.
Contains state-of-the-art digital valves to automatically regulate and maintain pressure for a specified strain regimen.
Multiple frequency, amplitude and waveform changes can be programmed in one regimen.
Drives up to four independent FlexLink® remote compression and/or tension controllers.
Gradient strain or unconstrained distention achieved by removing loading stations
Drives up to 4 Flexlink® Controllers with 1 FX-6000T Tension System
Works with BioFlex® Culture Plate, UniFlex® Culture Plate,24-well HT BioFlex® Culture Plate, Tissue Train Circular Foam Culture Plate,Linear Tissue Train culture plates,Trapezoidal Tissue Train Culture Plate
| Culture Plate for tension system | Max Achievable Strain | Strain Applications |
| (BioFLEX®CULTURE PLATES) | 21.80% | with cylindrical loading posts to apply equibiaxial strain to cells in monolayer (2D) |
| UniFlexCulture Plates | 12.20% | with Arctangle® loading posts to apply uniaxial strain to cells in monolayer (2D) |
| 24 well HT BIOFLEX®CULTURE PLATES | 15.00% | with 24 wells loading posts to apply equibiaxial strain to cells in monolayer (2D) |
| Tissue Train Circular Foam Culture Plate | 1.6%-20.80% | with cylindrical loading posts to apply equibiaxial strain to 3D constructs |
| Linear Tissue Train culture plates | 1.6%-20.80% | with Arctangle® loading posts to apply uniaxial strain to 3D constructs |
| Trapezoidal Tissue Train Culture Plate | 1.6%-20.80% | with Arctangle® loading posts to apply uniaxial strain to 3D constructs |
| No Loading Stations | 33% |
Flexcell® Tissue Train® Systems
The Tissue Train® culture system is a stand-alone 3D culture
system that allows investigators to create 3D geometries for cell
culture in a matrix gel or allow the cells to build a
self-assembled matrix that connects to the anchors in a Tissue
Train® culture plate. Flexcell currently has molds and/or plates
for creating three different shaped hydrogels: linear,
trapezoidal, and circular.
The FX-5000™ Tension System provides the investigator with a tool
to apply regulated uniaxial or equibiaxial strain to the growing
bioartificial tissues. A user can define a frequency, elongation
and duration of strain in a regimen that simulates the strain
environment of the native tissue in the body.
A measure of cellular remodeling of the extracellular matrix is gel compaction over time. ScanFlex is an automated image collection system that allows users to periodically scan items placed on a scanner bed. The ScanFlex software controls a digital scanner and allows users to program the number of times and the time intervals when digital scans are taken. When used in conjunction with Tissue Train® culture plates, ScanFlex can be used to determine the change in area of a bioartificial tissue (BAT). Furthermore, the area of a BAT can be measured using the XyFlex image analysis software. XyFlex software allows the user to automatically measure the BAT area in a large sequence of images.
Tissue Train® System includes:
· Host computer with monitor
· FlexSoft FX-5000™ software
· FX5K Tension FlexLink®
· Accessory package:
BioFlex® baseplate and four gaskets
Tissue Train® Trough Loaders
Arctangle® Loading Stations
Four Tissue Train® culture plates
Drying filter, water trap, vacuum tubing, and grease/lubricant
Flexcell® FX-5000™ Compression Systems
The FX-5000™ Compression System is a patented, computerized, pressure-operated instrument that applies a defined controlled, static or variable duration cyclic compression, to cells growing in vitro. This system utilizes regulated air pressure to deflect flexible-bottomed BioPress culture plates compressing a tissue sample or 3D cell culture between a piston and a stationary platen. This system can apply up to 14 pounds of applied force.
Apply cyclic or static compression to cells in 3D culture.
Simulate in vivo tissue forces and frequencies in an in vitro setting.
Contains state-of-the-art digital valves to automatically regulate and maintain pressure for a specified compression regimen.
Works with BioPress culture plates.
Multiple frequency, amplitude and waveform changes can be programmed in one regimen.
Drives up to four independent FlexLink® remote compression and/or tension controllers.
FX-5000™ Compression System includes:
· Host computer with monitor
· FlexSoft FX-5000™ software
· FX5K Compression FlexLink®
· Compression accessory package:
. BioPress baseplate and four gaskets
.Compression clamping system
.Four BioPress culture plates
.Tubing and quick disconnects
BioPress™ Compression Plates
Flexcell® Fluid Shear Systems
The Streamer® is a parallel-plate flow system that is used to apply fluid-induced shear stress to cells grown in a monolayer. The system includes a six-chamber laminar flow device designed to hold 75 x 25 x 1 mm Culture Slips®. The Streamer® system can be used to apply laminar, pulsatile*, or oscillating* flow to cells. A computer-controlled peristaltic pump is used to regulate shear stress from 0-35 dynes/cm2. This six place flow chamber can be used for various biological assays including, but not limited to, the assessment of RNA and protein expression by cells in response to fluid-induced shear stress and production of secreted molecules into the perfusate.
*When used in conjunction with the Osci-Flow® Flow Controller.
The Osci-Flow® is a software-controlled valve-operated device designed to provide oscillatory or start-stop flow patterns to cells cultured in the Streamer®, FlexFlow or other perfusion devices. The Osci-Flow® device is able to regulate flow both in an oscillatory (flow reversal) manner and in a pulsatile (square wave) mode, where the flow is stopped and then restarted after a designated period of time. The StreamSoft software allows the user to regulate frequency of oscillation or pulsatile patterns, as well as shear stress levels applied to cells.
The FlexFlow is a parallel plate laminar flow device designed to apply fluid shear stress and/or cyclic strain to cells in culture while providing a means for viewing cell activity under a microscope in real time. The FlexFlow fits on the stage of a standard upright microscope.
fluid shear Culture Slips® Microscope Slides
Room 906,9th Floor,Block 2A,ShangAoShiJi,Huilongguan Town, ChangPing District,BeiJing, China
One moment please
Member's Area
Messages 
Need Help
Browse Through Millions of High-Quality Products. 