Car Engine push start stop button system with remote start function for car alarm

1.This product has anti-theft function but without remote control. Use the remote control of the original car or a remote control installed later to remotely start the preheating and cooling

2.When you buy this product, please find a professional master to install it, otherwise it will cause a short circuit and burn the host, and it will not be returned and repaired.

3.As long as the car has the function of remotely opening and closing the door, that is, as long as the car has a remote control, the remote control can remotely open or close the door to achieve the remote start of the car.

4.When installing, first connect the plug to the corresponding wire, and then plug in the host. Please contact customer service if you need special wires for special cars

More discount of product and freight cost, please contact us

This is a simple and easy use Car Alarm with Finger Engine Start Push Button Start and Stop. Car Engine Push Starter is easy to install and use, can start or stop your car much easier and keep your car safe at the same time. This item is only work with DC12V cars at the moment.

Note: There is not a remote controller, you  can use your own remote controller or buy a remote controller for the remote start function(it means that there must be a remote function for your car already). Please find a professional person to install it.

You can find some other product with different functions here or chat with us about that if you want some more features.

Feature:

1.Push button engine start/shut down.
2.Telecontrol starting function.
3. Open acoustics and dashboard function.
4.Telecontrol starting safe handbrake detection function.
5.Push button engine activates the foot brake detectionfunction.
6.10 minutes timing flameout function after telecontrol starting.
7.Automatic locking the door function after telecontrol starting.
8.Can be matched your car alarm system or keyless entry system.
9.Can be used in all kind of 12V cars.
10. Easy to install and to detach.

1.How to release the direction lock?

To install a one-button start, you must break the car key in the key slot to unlock the direction lock,Or Remove the lock directly

Of course, you can also bring the key with you, and you can insert the key every time you unlock the car.

2.Can a car with an anti-theft chip be installed?

If some models are equipped with engine chip anti-theft, the chip on the original car key handle must be removed to stick to the ignition switch to maintain mutual induction with the engine.

Or remove the induction coil at the lock, and then tie the chip and the induction coil together, and then install it inside the instrument panel, hidden and beautiful.

More question, please contact us